Clik here to view.
Re: EX4200/EX4500 does not pass via the GRE traffic going from devices...
Thank you all for your help, but did not find the reason, there is no time, use a different scheme.
View ArticleQFX5100-48T best deployment option
What is the best deplyment option for 2 * QFX5100-48T. I can see that QFX5100-48T only support leaf node . Can I configure QFX5100-48T as normal virtual chassis using QSFP+ to QSFP+ Ethernet Direct...
View ArticleRe: QFX5100-48T best deployment option
QFX5100-48T fully supports VC with either other QFX5100 models and can include EX4300 as well. QFX5100-48T can also be a leaf within VCF design. Leaf is NOT the only option.
View ArticleLACP Question
Running EX2200 to EX4500 LAG.I have not setup any LACP, Active or Passive. My gut says put Passive on it. What is best practice.? Thanks
View ArticleRe: LACP Question
Use can use any one of below options.1) One switch you must use LACP active & another switch use passive2) Both switches you can use active as well As per LACP, active mode initiates LACP packets...
View ArticleRe: Ex4300 Virtual Chassis member issue
Hi again, Issue is still existing even after Software update from 13.2 -> 14.1. It seems frustrating as I think I've configured it right. Anyway thanks for the help.
View ArticleRe: EX2200 Base License
Ive tried ospf on an ex2200-24p-4g. Even with just 2 interfaces listed in OSPF, it complains "warning: requires 'ospf2' license"
View ArticleRe: EX2200 Base License
You need the EFL. SKU is EX-24-EFL. There is a different license for EX2200-C. See:...
View ArticleQFX 5100 SFP compatability
Hi, Will QFX 5100 supports SFPP-10GE-LR SFPs - the ones usually used with MX or it works only with the QFX ones - for example QFX-SFP-10GE-LR. Also, would it accept 3rd party optics - say Cisco's?
View ArticleRe: DHCP snooping doesn't update lease timer during a lease renewal
Hi, anybody from JTAC supervisors do a monitoring of this Forum? If so, please send me a PM for further discussion.JTAC stuck in processing of the support case and wasting our time. There is some issue...
View ArticleRe: QFX 5100 SFP compatability
This page, found via Google search, lists the "officially" supported Juniper Optics for QFX5100:...
View ArticleRe: Ex4300 Virtual Chassis member issue
hi eaguilar, Have you check out support LACP setting between SRX and EX as per http://kb.juniper.net/InfoCenter/index?page=content&id=KB22474&actp=search ? Let me know how you go. cheers,Alex
View ArticleRe: Ex4300 Virtual Chassis member issue
Hi Alex, Yes I have tried both lacp and non-lacp before but they are still the same. Here are the interfaces between SRX and EX: SRX-A ge-0/0/14 ---> EX1 ge-0/0/46SRX-A ge-0/0/15 ---> EX2...
View ArticleMAC-Based Authentication EX4300 - AD Radius Server
Hi all, I'm trying to configure MAC-Based authentication on my Juniper EX4300 switch leveraging Windows Domain Controller as the Radius Server and an object in Active Directory which contains the MAC...
View ArticleRe: Remote Port Mirroring over AE interface
Hi, Any solution for this ? I have the same issue....I need to send traffic to a server that is behind a AE interface, ae5 { description LACP-01_02; aggregated-ether-options { minimum-links 1; lacp {...
View ArticleRe: MAC-Based Authentication EX4300 - AD Radius Server
Can you share the CLI configuration?
View ArticleRe: Ex4300 Virtual Chassis member issue
hi eaguilar,The way I see it, based on your setup:- You should not have LACP configured on neither EX chassis nor SRX cluster - When EX member 1 is DOWN,reth1 is DOWN and you wont be able to ping...
View ArticleRe: Ex4300 Virtual Chassis member issue
Eagular, been following this thread. I believe your config, at least on the EX side is improper. On the EX4300 none of the interfaces should be members of an AE, they should all be single links. The...
View ArticleLAG loadbalancing method
Hello, I would like to know if the number the links in ae interface to have influence in load balancing traffic. For example if ae interface has two links,is the traffic 50% loadbalance for every...
View ArticleLACP EX3300 bandwidth issue
Hi, 1- Attached simple diagram2- Here is switches configuration EX_stack_serversadmin@System_VCx2_3300-Storage> show lacp interfaces Aggregated interface: ae5 LACP state: Role Exp Def...
View Article