Re: show mac address, IP and interface in EX switch
please help me in below I need output in below format.I can be possible by adding these commandsshow ethernet-switching tableshow dhcp snooping bindingshow interfaces descriptions | except downI have...
View ArticleRe: strange behavior EX4200 (unicast flood) - update - so, strange behavior 4550
EX4200: show ethernet-switching interface ae0admin> show ethernet-switching interfaces ae0 Interface State VLAN members Tag Tagging Blocking ae0.0 up default 1 untagged unblocked4550 ae 7 - ae0...
View ArticleQuestion about vlan routing on an EX 3300
I'm setting up a test environment/lab and am not able to get routing from a host on a vlan to off of the switch on to a separate network. Vlan33 ( cloud )Host A ( 192.168.33.10 )The switch is...
View ArticleRe: Question about vlan routing on an EX 3300
Hello, On the Router with IP 192.168.5.1, do you have a route to 192.168.33.0/24 pointing tp 192.168.5.2 i.e. EX3300?I think that should be the problem. Regards, Rushi
View ArticleRe: Tacacs puls not working on virtual chasis
Routing is an important consideration in setting up this. Yes, if you do not select a source addres you will make the request from the root routing instance using the mgmt address if enabled and up or...
View ArticleRe: Question about vlan routing on an EX 3300
I think you are absolutely correct! I woke up this morning thinking that might be it and I'll test it as soon as I can. Thanks for the pointer!!
View ArticleRe: Tacacs puls not working on virtual chasis
I have added the tacacs Plus source address set system tacplus-server 10.x.x.28 source-address 10.x.x.x but still the tacacs address is not reachable by the default routing instance but reachable by...
View ArticleRe: Tacacs puls not working on virtual chasis
Just to confirm the source address here 10.x.x.x is an ip addres configured on an interface of the ex switch.10.x.x.28 source-address 10.x.x.x Try running the following tests: ping 10.x.x.28 source...
View ArticleEX3300 BW policer Config
Hello Community, I am currently setting up a BW policer in a EX3300 running 12.3R6.6. I've set a Policer in a Layer 2 port as a test before implemnting it in a L3 Port. the config is the...
View ArticleRe: logical-interface-policer
Thanks for the post. Any way to test this without max out the Port's BW?
View ArticleClik here to view.
EX3200 vs. Cisco WLC and AP
Hi guys... I have inherited a customer from another company and we are setting up a Cisco WLC along with Cisco APs.We dont want to replace the existing Juniper switches as there are many and they are...
View ArticleRe: Tacacs puls not working on virtual chasis
when i do the ping and tracert using the below it is gving the error that ping is not bind with this... for the taccas server or anything Is there any condition to reach the tacacs server from the...
View ArticleRe: EX3300 BW policer Config
Hello, I do not think that there is any native way of testing policer in Juniper EX switches.Your configuration allows the traffc upto 32M and burst size of 2M (above 32M) to pass through. Only when...
View ArticleRe: Tacacs puls not working on virtual chasis
This message generally means tha tthe source address you are trying to use is either not configured on an interface on the switch. Or that this itnterface is currently link down on the device.
View ArticleRescue-Config - Hostname not set on EX2200
Hi, on an EX2200 when the command "request system config rescue save" is issued, the hostname is not set in the rescue-config.When using "show system configuration rescue" the string host-name is...
View ArticleRe: Rescue-Config - Hostname not set on EX2200
I do not see this on an ex2200 running 12.3R12 here. Does your hostname have any unusual characters?
View ArticleRe: EX3300 BW policer Config
rtilak. Thank you very much for the info. I'll try to max out the port to test it.
View Articlesyslog and SNMP traps failing
Hello, I am not receiving any syslog or SNMP traps on my Kiwi Syslog server.Specifically I am trying to receive syslog or traps of when someone logs in successfully or unsuccessfully.However when I...
View ArticleRe: Rescue-Config - Hostname not set on EX2200
Hostname is Test-SW-001 - nothing special.I will try to fetch another EX2200 and see if it has the same behavior
View ArticleRe: syslog and SNMP traps failing
Hi, You may need to add this for the syslog:set system syslog host x.x.x.x authorization anyCheers,Ashvin
View Article