Clik here to view.
Re: High multicast
In this case, as in most, Google is your best friend - See here: http://forums.juniper.net/t5/forums/replypage/board-id/switch/message-id/15080 MAC filter is probably best option, apply it where you...
View ArticleRe: VXLAN on DCI question
Hias far as I know... EVPN only works with iBGP and not with eBGPso you need to change your overlay to use iBGP by using the loacl-as parameter, so that for the overlay all switches are in the same...
View ArticleClik here to view.
Re: Noob question Web-Managment Ex2200
Thanks i will try this asap! Dont work. so i write code.. as you sayed root@hakkern> show system processes extensive | match http 6111 nobody 2 98 0 7424K 4608K ucond 0:04 1.05% httpd 6101 root 1...
View ArticleClik here to view.
Re: MACsec on EX3400
Neither me. I hope, that all of the people on the internet that do NOT know, will not join this thread, coause its gonna be the biggest ever. Cheers,Pawel
View ArticleRe: best practice for switch lockdown?
Hi, As Steve says each interface will inherit the config from the interface-range.You could check this using:> show configuration interfaces x/x/x | display inheritanceCheers,Ashvin
View ArticleCommit Error?
Hi all, Any help would be much appreciated. We're running a stack of 2x EX 4300 on JUNOS 13.2X51-D21.1 When attempting to commit, we are met with this: "error: could not open configuration database...
View ArticleShaping based on VLAN on QFX5100
We have a QFX5100 that connects to our VPLS network using an aggregrated ethernet port in trunk mode with various VLANs on it and I'd like to shape the traffic on a per vlan basis, as per the following...
View ArticleRe: MACsec on EX3400
You can use the Juniper feature explorer for these types of questions. https://pathfinder.juniper.net/feature-explorer/ Select the "Compare Multiple Products" optionChoose the two platformsThen filter...
View ArticleRe: Commit Error?
I've seen similar problems on the ACX series that are cleared after a system reboot.
View ArticleRe: High multicast
You can apply a BUM filter to keep the multicast traffic down to an acceptable level on the interface. The instructions on in this KB article...
View ArticleClik here to view.
Trunking a VLAN! what is preventing it
I havent got a clue whats going on here, what should be really simple i seem to be struggling with, wondering if someone can help!. I have the following scenario: Two Core Switches connected to gether...
View ArticleRe: Noob question Web-Managment Ex2200
Hello. This did not work. Any suggestions ? håkon
View ArticleRe: Trunking a VLAN! what is preventing it
This post is very useful for best networking clout which special need for a systems engineering .
View ArticleRe: Noob question Web-Managment Ex2200
which step from what I shared with you didn't work ?can you share with us the "show log httpd.log " output when you're trying to reach the J-web management ?
View ArticleMACsec with VRRP
I am planning to „streach” some VLANs using MACsec and then run VRRP “over” it – i.e.:have trunk port on every of the two switches configured with MACsecrun VRRP for RVIs connected to those VLANs on...
View ArticleRe: Trunking a VLAN! what is preventing it
Just an idea: maybe you have some kind of VLAN aware STP protocol configured and it is blocking this VLAN on one of the ports or there is some misconfiguration there (like root on access switch and...
View ArticleRe: MACsec with VRRP
No issues. MACSEC functions between the switches (in your case) only, and does not affect any of the IP portion of the frame.
View ArticleClik here to view.
Re: MACsec on EX3400
Thaks for answer. I am aware of the Feature Explorer - I have checked it as the first thing. Unfortunatelly, Feature Explorer is not very specific (and sometimes sligtly inacurate and ambigious), and...
View ArticleRe: MACsec on EX3400
I hesitate to respond here, as I was not 100% sure of the answer, still am not, BUT I believe the MACSEC functionality will be the same between EX3400 and EX4300. Supported on all interfaces be they...
View Article