Re: VXLAN/EVPN Data Center Interconnect
thanks for the reply. I've seen these docs. I know how to configure EVPN VXLAN, I tested it and it works fine, however I have a problem with stiching EVPN/VXLAN with EVPN/MPLS.
View ArticleRe: EX4200 OSPF not working properly
Hi, I need to make the xe-2/0/14 having the route to all 10.10.0.0 traffic, not sure on that either.--> The policy can be made more granular by matching specific routes. Example:set policy-options...
View ArticleRe: EX4200 OSPF not working properly
Ashvin, As I can only change this during after hours, I will give it a try tonight, and report success or failure. Thanks
View ArticleRe: vqfx10k-pfe is not starting
it could be that the console data is not getting directed to screen.when you see the grub menu, press e for “edit” and insert into before or after Root=Label, console=ttyS0 to continue. if it is not...
View ArticleRe: Juniper switchport configuration
thanks, so I have to decide either to use 70 or 1 and make that defaults on all swicthes MDF and all IDFs, currently the trunk is set to use 70. Is that going to have any impact on all network is I...
View ArticleEvpn Vxlan multihoming - problem with Linux
Hello, I have problem with linux bonding configuration. I try to set up config according to this document: https://www.juniper.net/assets/us/en/local/pdf/whitepapers/2000606-en.pdfAll seems to work ok...
View Article802.1x broken in Junos 15.1R5.5
Hello, we have been upgrading some EX 3300 switches to the recommanded Junos 15.1R5.5 release. Now we are facing the problem that 802.1x isn't working properly anymore. The supplicant messages are send...
View ArticleRe: Juniper switchport configuration
You have to decide which is easier and a better option. By default trunk ports on Juniper devices only carry tagged traffic so you can carry multiple vlans. The native-vlan-id is an option that allows...
View ArticleRe: EX4300 Layer 2 tunneling/Q-in-Q
Hello, What do you mean by "Dont assign a vlan-id to the S-VLAN " Could you please put your current config? I am experiencing the same issue here. thanks
View ArticleRe: Juniper switchport configuration
Based on your further data I would suspect you have an issue with the connectivity to these Aerohive physical link and not an RSTP issue. The traps show the link going down. You can check the port...
View ArticleQFX ISIS License
Hi, We have a QFX switch configured with IS-IS. When you commit it provides a warning IS-IS licence “invalid". The configuration does commit and it seems like IS-IS is also working. Online describes...
View ArticleRe: QFX ISIS License
Hi, you will correctly need a feature license for your QFX switch - but as you can see it will work. Just every time you commit it will result in an error telling you that a license is missing.This...
View ArticleRe: vqfx10k-pfe is not starting
Hi,I will try.VM has 16G memory so it should be enought. //Niklas
View ArticleRe: Juniper switchport configuration
Thank You Gentelmen, Yes You all right about STP - its not related to STP - period. The problem looks like is with PoE but this is a nigtmare since its everywhere in 7 places including Virtual Chasis,...
View ArticleRe: Juniper switchport configuration
I have a better idea, I will set up extra 2200 as I have connect directly aerohive access point with cat 6 cable and see if that happens.
View ArticleRe: EX4200 OSPF not working properly
Ashvino, I have something wrong in the brackets, cannot find the syntax error. {master:3}[edit policy-options] admin@CORPSW01# load merge terminal [Type ^D at a new line to end input] policy-statement...
View ArticleRe: Q-in-Q on configuration on EX4300 (13.2X50-D17) fails
Understood. But: Into which Vlan the frames are mapped then, if there is no vlan-id set?
View ArticleRe: ELS and QinQ and Layer 2 Protocol Tunneling
Hi, i have some updates. I tested passthrouth ICMP packet and PVST+ frames between CE switches. ICMP:CE1 -- ICMP (C-VLAN10) -> EX3400 -> ICMP (C-VLAN10, S-VLAN100) -> EX3400 -> ICMP...
View ArticleRe: Juniper Trunk port with native vlan - Aerohive Access Point looking a way...
Thank You !!!! "you can only have one native vlan which is untagged on the trunk port." Yes and thats correct - I have one native vlan in the trunk port. Thx
View ArticleEX-2200-c restart interfaces every few seconds
Hi, My first post here.I'm italian and working with juniper devices. I got an issue with a EX2200-C.COM and MGMT interfaces works, but the 12 ethernet interfaces go down e restart every 10/15 seconds....
View Article