EX4500 Backplane throughput and PPS per PFE
Dears , I need to monitor the actual load of EX4500 backplane ( in each PFEs) in term of throughput and PPS , any way to do that ? ( similar to "show fabric utilisation all" in CISCO catalyst )...
View ArticleRe: EX4500 Backplane throughput and PPS per PFE
Hello, Can you check if this command gives you what you want? show pfe statistics traffic Regards, Rushi
View ArticleRe: EX4500 Backplane throughput and PPS per PFE
Hi, Perhaps you could try:show class-of-service fabric statistics summary You could also try playing around with hidden command:show chassis fabric statistics [hidden]Example: show chassis fabric...
View ArticleRe: EX4500 Backplane throughput and PPS per PFE
Hello, None of those commands is supported on this plateform : NSN@EXFNG39002-A> show pfe statistics trafficerror: command is not valid on the ex4500-40fNSN@EXFNG39002-A> show class-of-service...
View ArticleRe: EX4500 Backplane throughput and PPS per PFE
Hello, I did not find any command equivalent to 'show fabric utilization all'.You can get interface level real time pps details using 'monitor interface traffic' command though. Regards, Rushi
View ArticleEX4300 QinQ Compatibility with cisco 3750
Having problems tunneling vstp Cisco Customer Switch----> g1/0/4 Cisco 3750(CPE) g1/0/5---->ge-0/01 Ex4300(CPE) ge-0/0/2---->Cisco Customer Switch QinQ tunnel is done between Cisco 3750 and...
View ArticleRe: EX4300 QinQ Compatibility with cisco 3750
Hi, Did you configure layer2-protocol-tunneling on the EX same as you have l2protocol-tunnel on the Cisco? Cheers,Ashvin
View ArticleRe: EX4300 QinQ Compatibility with cisco 3750
Hello as you can see the mac-rewrite on Juniper does the job.
View ArticleRe: EX4300 QinQ Compatibility with cisco 3750
Hi, I assume you want to tunnel Cisco PVST+ BPDUs and not run vstp with the Cisco.Can you share output of "show mac-rewrite interface x/x/x detail" on the EX.Do you have option to mac-rewrite for...
View ArticleRe: EX4300 QinQ Compatibility with cisco 3750
HelloHere you go : # run show mac-rewrite interface detailInterface Protocolsge-0/0/2 STP VTP CDP VSTP I am running version 14.1X53there is no pvstp only vstp as you can see # set protocols...
View ArticleRe: Steps to configure DHCP relay configuration using Server Groups in EX...
These are steps that I am following while doing configuration!
View ArticleRe: EX4500 Backplane throughput and PPS per PFE
Hi Please use "show pfe statistics bridge" command to see the desired output. Cheers !! Amit
View ArticleRe: EX4500 Backplane throughput and PPS per PFE
Hi , The provided command give only a cumulative value , not a real time throughput/pps of the PFEs : EX4500> show pfe statistics bridge PFE: 0...
View ArticleRe: QFX5100-What is the RPM(revolutions per minutes) threshold in Fan Tray?
I would open a JTAC case on this one. There may be some hidden command to change the rpm for the various levels that needs to be reset. Since these are all the same hardware there does not seem to be...
View ArticleRe: EX4500 Backplane throughput and PPS per PFE
Hi kayssar,There is no command which provides pps of the PFE in real time.
View ArticleRe: How to check memory utilisation in EX4200
By the way, in the EX4200/4300/4500/4550/4600 how could we know the memory allocation and usage of each: Next-hop, firewall filters, counters... Thank you in advanceTrung
View ArticleClik here to view.
login message banner
hello guys- i am trying to copy a login banner i was using in cisco for some reason i am not able to use this banner in juniper maybe i am doing something wrong i am kinda new to juniper. how can get...
View ArticleRe: login message banner
Hi, Unlike Cisco, I believe its not possible to use any chosen delimiter for the banner message.On Junos, a new line requires...
View ArticleQFX5100 not getting a dhcp address on the mgmt interface
Hi all I have a QFX5100 that I am configuring. I connected the ethernet mgmt port to my dhcp server and set the em0 unit 0 to receive dhcp. but still it is not getting an dhcp address. What's going on?...
View ArticleRe: QFX5100 not getting a dhcp address on the mgmt interface
This is what I generally use to have an interface be a dhcp client. You can also add the vendor id naturally. unit 0 { family inet { dhcp { retransmission-attempt 6; retransmission-interval 5;...
View Article